Tips to Stop The Spread of Mold

5/12/2020 (Permalink)

•  Keep humidity levels as low as you can—no higher than 50%--all day long.
  • An air conditioner or dehumidifier will help you keep the level low.
  • Bear in mind that humidity levels change over the course of a day with changes in the moisture in the air and the air temperature
    • You will need to check the humidity levels more than once a day.
• Be sure your home has enough ventilation.
  • Use exhaust fans which vent outside your home in the kitchen and bathroom.
  • Make sure your clothes dryer vents outside your home.
• Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.
• Clean up and dry out your home thoroughly and quickly (within 24–48 hours) after flooding.
• Add mold inhibitors to paints before painting.
• Clean bathrooms with mold-killing products.
• Remove or replace carpets and upholstery that have been soaked and cannot be dried promptly.
• Do not use carpet in rooms or areas like bathrooms, basements, or kitchens that may have exposure to a lot of moisture
• WE SPECIALIZE IN MOLD CLEANUP, GIVE US A CALL AT (781) 980-7060 SO YOU DON'T HAVE TO DO ANY DIRTY WORK.

Mold In The Winter

1/21/2019 (Permalink)

Winter Mold Is An Issue, Call Us 781-341-7007

Several factors lead to increased concerns about mold during the winter months.

For one thing, moisture conditions indoors can lead to the growth of molds and mildews. While it's true that forced heating systems make indoor air drier overall during the winter months, certain areas of the home may experience intensified levels of humidity because of a lack of ventilation. Bathrooms and kitchens are particularly susceptible to this problem. Steamy showers in small bathrooms spell trouble, as does the accumulation of steam from washing dishes and cooking in the kitchen. Because of cold weather, windows aren't usually open, and condensation collects on indoor surfaces such as cold walls or windows and their frames, often creating ideal conditions for mold allergies in winter.

In addition, outdoor exposure is also common during early winter months when piles of leaves collect and absorb moisture. Cold, damp air promotes mold growth in many additional outdoor locations during this time of year as well. Mold thrives in dead vegetation, and is not killed by winter frosts. In fact, many molds can become dormant during the winter only to grow on plants killed by the cold when springtime arrives - making mold a year-round allergy trigger.

Any disturbance to an outdoor mold source, such as can occur when raking leaves or tending to a compost pile, disperses mold spores through the air, exposing individuals to varying levels of mold inhalation. So, whether you're indoors or outdoors, mold allergies in winter can be a problem that cannot be overlooked.

Obviously, if you notice visible mold or mildew growing in a certain area of your home, it is clear that you have a mold problem. You will need to identify the source of the moisture and remedy the problem at the source. For instance, if you discover mold growing under your bathroom sink, look to see if there are leaky pipes that may be dripping water and repair them.

IDENTIFYING THE SOURCE OF MOLD ALLERGIES IN WINTER

However, though you may not notice mold growth in certain area, this does not mean that mold isn't present or that it won't grow if you don't take action. Indications such as condensation forming on window panes or peeling paint on window sills suggest moisture buildup that makes the area susceptible to mold growth. Water stains likewise indicate a moisture problem and a potential hot spot for mold growth. Any area where water sits or steam collects, such as in shower stalls or bathtub rims, (particularly the area around toiletry bottles and the like) is also a place to keep an eye on.

If you are seeing and suspecting mold in your home, please call us and let us know.

We are here with the help you need

The Mold Remediation Process

8/20/2018 (Permalink)

Our process is like no other, get the best when you have a mold situation by calling 781-341-7007 SERVPRO of Milton/Braintree

In addition to causing significant property damage, mold can produce allergens and irritants that can cause health effects. SERVPRO of Milton/Braintree understands mold and mold growth and have the training and equipment to remediate the mold in your home or business.

Understanding Mold

Microscopic mold spores exist naturally almost everywhere, indoors and outdoors, so removing all mold from a home or business is impossible. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

• Mold is present almost everywhere, indoors and outdoors.
• Mold spores are microscopic and float along in the air, and they may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
• Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. 
• Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise the mold may return.
• Let your nose lead the way. Mold often produces a strong, musty odor, and can lead you to possible mold problem areas.
• Even higher than normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

Understanding The Mold Remediation Process

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate the “typical” process:

Step 1: Emergency Contact 781-341-7007

The mold cleanup and restoration process begins when you call us. Our representative will ask a series of questions to help us determine the necessary equipment, resources, and personnel.

Step 2: Inspection and Mold Damage Assessment

SERVPRO of Milton/Braintree will carefully inspect your property for visible signs of mold. Mold feeds on cellulose and water and can be hidden from plain view. They use various technologies to detect mold and hidden water sources.  

Step 3: Mold Containment

We use various containment procedures to prevent the spread of mold. We may use advanced containment procedures like negative air chambers to isolate the contaminated area with physical barriers and negative air pressure to keep the mold spores from spreading during the cleanup process. All fans and heating and cooling systems will be turned off to prevent the spread of mold.

Step 4: Air Filtration

Our specialized filtration equipment allows their Professionals to capture microscopic mold spores out of the air. They utilize powerful “air scrubbers” and HEPA vacuums to prevent the spread of these mold spores while the mold remediation is in process.

Step 5: Removing Mold and Mold-Infested Materials

The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. SERVPRO of Milton/Braintrees use anti fungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. Removing and disposing of mold-infested porous materials, like drywall and carpeting, may be necessary to remediate heavy mold growth.

Step 6: Cleaning Contents and Belongings

SERVPRO of Milton/Braintree cleans your furniture, decorative items, curtains, clothing, and other restorable items affected by mold. They use a variety of cleaning techniques to clean and sanitize your belongings. They’re also trained to remove odors and deodorization using fogging equipment.

Step 7: Restoration

Depending on the level of mold damage, drywall, subfloors, and other building materials may be removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business.

Mold Removal vs Mold Remediation

8/13/2018 (Permalink)

Call Us Today 781-341-7007

What’s the Difference?

Since microscopic mold spores exist naturally almost everywhere, indoors and outdoors, removing all mold from a home or business is impossible. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold. This is a fallacy.

A qualified restoration company understands the science behind mold and mold growth. SERVPRO of Milton/Braintree have the training and expertise to remediate the mold in your home or business. Mold remediation focuses on getting mold levels back to normal, natural levels.

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. These are the steps below:

• Step 1: Emergency Contact 781-341-7007
• Step 2: Inspection and Mold Damage Assessment
• Step 3: Mold Containment
• Step 4: Air Filtration
• Step 5: Removing Mold and Mold-Infested Materials
• Step 6: Cleaning Contents and Belongings
• Step 7: Restoration

Facts & Myths About Mold

7/24/2018 (Permalink)

Discovering mold can be scary, we can quickly handle your mold remediation problem Call us today 781-341-7007

Mold is a non-scientific term for many types of fungi - unwanted, unappealing patches of black, brown, yellow, pink, green, smelly, fuzzy growths. Countless species of mold are found both indoors and outdoors

For the average homeowner, mold growth can be one of the top health hazards in their home, as serious a concern as asbestos and lead. Considered a respiratory hazard, any mold growth in your home should properly be remediated by a IICRC mold certified technician. At SERVPRO of Milton/Braintree, we have highly trained mold removal professionals on staff that can help make your home a safer environment, because we understand the difference between the facts and myths about mold and the mold remediation process.

Facts

• Mold is present in almost all atmospheres
• Air sampling is the only current accurate method to analyze non-visible spores and should be performed by an Industrial Hygienist (I.H.)
• During mold remediation there should always be a form of containment.
• Mold can cause health concerns

Myths

• Bleach has been a proven product for eliminating mold
• Mold only grows in wet or moist environments
• Any cleaning company is equipped to eliminate mold
• Mold can be fully eradicated

Call SERVPRO of Milton/Braintree for your free consultation and mold remediation estimate. We’ll make sure your property is cleaned quickly and safely so that it will be like it never even happened.

Buyers And Sellers Of A Home With Mold

7/19/2018 (Permalink)

Contact us today to get your buying or selling back on track after the discovery of mold 781-341-7007

Whether you're buying a home with mold or selling a home with known mold issues.

It's best to leave the mold removal to the professionals. By hiring a company like SERVPRO of Milton/Braintree you know the job will be done safely, thoroughly removing all traces of mold and following all industry standards to prevent the development of mold in the future.

Buying a house with mold or selling a house with mold can pose a variety of challenges. For both the home buyer and the seller, the two main issues with a home that has mold are the concerns for possible health hazards and the cost to fix the mold issue. The mold remediation professionals at SERVPRO of Milton/Braintree can have your mold problem re mediated quickly and get your buying and selling back on track

Buyers: 

If you see or suspect mold its best to hire a home inspector before putting an offer in on the house. Even if you don't see it yourself, mold can be anywhere you may not look and create a world of problems down the road if not treated.

Sellers:

The laws differ from state to state. Its best to be upfront with your real estate agent if you see or suspect mold. You can then address the problem before selling the home and facing mold related legal liability. 

Mold in Your Home Or Business

7/2/2018 (Permalink)

Call us today for a free estimate on your Mold Remediation 781-341-7007

Mold can spread through a home in as little as 48 hours

Microscopic mold spores naturally occur almost everywhere, both outdoors and indoors. This makes it impossible to remove all mold from a home or business. Therefore, mold remediation reduces the mold spore count back to its natural or baseline level. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

• Mold is present almost everywhere, indoors and outdoors.
• Mold spores are microscopic and float along in the air and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
• Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens and irritants.
• Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
• Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
• Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.

Why You Cant Use Bleach To Remove Mold

6/18/2018 (Permalink)

Give us a call today if you see or suspect mold in your home or business 781-341-7007

Using bleach in an attempt to remove mold on a porous surface like wood or drywall can have very negative effects.

It’s our goal help to you identify your mold sources and develop your mold elimination strategy. 

Because of its chemical composition, bleach is unable to penetrate beyond the surface and get to the root of the mold. So while it may seem you’re cleaning up the mold, you’re actually just removing the visible part you can see – the root of the mold is still there. In a few short days that mold will reappear. 

Using bleach on wood can actually drive the mold deeper inside the fibers causing more problems for you later. Because bleach is mostly water, you can actually feed the mold root with what it needs to grow – moisture. To sum it up bleach is toxic and using it to remove mold on a porous surface like drywall or wood will cause more harm. 

At SERVPRO Milton/Braintree we are going to locate the source of the mold and prevent it from growing. By having your mold issue professionally taken care of you can be assured the problem will be taken care of the right way. 

What to do if you see Mold

4/26/2018 (Permalink)

Basically any type of white or colored growth that appears in any damp area should be investigated further. Call us today for removal and remediation

If you see visible mold, do not disturb it. You can inadvertently spread the mold infestation throughout your home. When mold is disturbed, the mold can release microscopic mold spores which become airborne and can circulate inside your home.

What to Do:

• Stay out of affected areas.
• Turn off the HVAC system and fans.
• Contact SERVPRO of Milton / Braintree for mold remediation services.

What Not to Do:

• Don’t touch or disturb the mold.
• Don’t blow air across any surfaces with visible or suspected mold growth.
• Don’t attempt to dry the area yourself.
• Don’t spray bleach or other disinfectants on the mold.

About Our Mold Remediation Services

SERVPRO of Milton / Braintree specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business.  Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.

If You See Signs of Mold, Call SERVPRO of Milton / Braintree Today – (781) 341-7007

Attic Mold Remediation

8/11/2017 (Permalink)

Attic mold grows on roof sheathing in attics when warm air from the house gets trapped in the attic due to inadequate insulation or insufficient ventilation (not enough soffit and/or ridge venting). When it gets cold outside, the temperature of the roof sheathing drops below the dew point causing moisture to form on the sheathing. This combination of moisture and wood provides the perfect setting for attic mold growth. Attic mold starts as a white or gray fuzzy growth and can spread quickly. During the coldest part of winter or hottest part of summer, it goes dormant and turns black. When optimal growing conditions return, the dormant mold will come alive again and start growing and spreading.

Here at SERVPRO of Milton / Braintree, we don’t only remove your mold issues, we determine the root cause and work with you to prevent future attic mold growth.  Got attic mold? Contact us at 781-341-7007 to get rid of your mold problem!

Facts About Mold

7/24/2017 (Permalink)

For the average homeowner, mold growth can be one of the top health hazards in their home, as serious a concern as asbestos and lead. Considered a respiratory hazard, any mold growth in your home should properly be remediated by a IICRC mold certified technician. At SERVPRO of Milton/Braintree, we have highly trained mold removal professionals on staff that can help make your home a safer environment, because we understand the difference between the facts and myths about mold and the mold remediation process.

Facts

• Mold is present in almost all atmospheres
• Mold spores can contain mycotoxins that can be harmful to the respiratory system.
• Infants, the elderly, pregnant women, and individuals with immune deficiencies or a history of immune weakness are among those who may be affected more easily and more severely by a mold infestation.
• Air sampling is the only current accurate method to analyze non-visible spores and should be performed by an Industrial Hygienist (I.H.)
• During mold remediation there should always be a form of containment.

Myths

• Bleach has been a proven product for eliminating mold
• Mold only grows in wet or moist environments
• Any cleaning company is equipped to eliminate mold
• Mold can be fully eradicated

Call SERVPRO of Milton/Braintree for your free consultation and mold remediation estimate. We’ll make sure your property is cleaned quickly and safely so that it will be like it never even happened.

Call us today at (781) 341-7007.

About SERVPRO of Milton / Braintree

SERVPRO of Milton/Braintree specializes in the cleanup and restoration of residential and commercial property after a fire, smoke, or water damage event. Our staff is highly trained in property damage restoration. From initial and ongoing training at SERVPRO’s corporate training facility, to regular IICRC-industry certification, you can rest assured our staff is equipped with the knowledge to restore your property.

Let us inspect your HVAC system

7/21/2017 (Permalink)

duct cleaning can be an essential part of the cleanup process

SERVPRO of Milton/Braintree will inspect your HVAC system and ductwork and make recommendations about the best way to address your indoor quality and concerns. The inspection can save you money and provide peace of mind on the health of your HVAC system and ductwork.

In some circumstances, such as after fire, smoke, or suspected mold growth, duct cleaning may become a essential part of the cleanup process.  In the cases, your SERVPRO of Milton/Braintree can often restore the HVAC system and ductwork to pre-damage condition.

We can Help:

• Remediate bacteria, fungi and mold
• Reduce potential for mold growth
• Restore peak energy efficiency
• Eliminate offensive odors
• Provide free written inspections and estimates

Call SERVPRO of Milton / Braintree today to help protect your health and your property from ventilation and air quality issues – 781-341-7007

Mold – Don’t let it grow!

6/30/2017 (Permalink)

Mold is more likely to spread when an environment has been subject to moisture for a long period of time

SERVPRO of Milton / Braintree professionals handle water damages every day and know prompt action is required to prevent mold growth.  Mold is more likely to spread when an environment has been subject to moisture for a long period of time.  If your property has sustained a recent water damage, it is vital to remove excess water and dry the structure promptly.  If there is an ongoing moisture problem in the building, it is important to be alert for the following:

• The presence of visible mold
• Strong musty odors which may indicate mold is present
• Any evidence of past moisture problems that might have caused undetected mold growth
• Excessive humidity

If you think you might have a mold problem, call SERVPRO of Milton / Braintree today at 781-341-7007!

What’s lurking in your ducts?

6/30/2017 (Permalink)

Dirty ducts can circulate odors and contaminates such as mold and irritating dust throughout your building or home

Sweep away years of dust and dirt- to help reduce the potential for damage and health risks. Since the ventilation system is often the biggest culprit in poor indoor air quality, inspecting the duct work should be a high priority. In most cases, the HVAC system has been operating for some time without much attention. Dirty ducts can circulate odors and contaminates such as mold and irritating dust throughout your building or home.

The SERVPRO proven duct cleaning system is cost-efficient and we use a portable ventilation and air duct cleaning system to remove years of dust and grime.  Inspecting the heating, ventilation, and air conditioning unit (HVAC) is a service offered by SERVPRO of Milton/Braintree. Keeping the HVAC system and ductwork clean can potentially extend the life span of the equipment by allowing it to operate at peak condition, which may save you money.

SERVPRO of Milton/Braintree

For all of your duct cleaning needs - Call Us Today 781-341-7007

SERVPRO of Milton / Braintree Specializes In Mold Removal

4/11/2017 (Permalink)

Microscopic mold spores naturally occur almost everywhere, both outdoors and indoors. This makes it impossible to remove all mold from a home or business. Therefore, mold remediation reduces the mold spore count back to its natural or baseline level. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

• Mold is present almost everywhere, indoors and outdoors.
• Mold spores are microscopic and float along in the air and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
• Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens and irritants.
• Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
• Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
• Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.

If You See Signs of Mold, Call SERVPRO of Milton / Braintree Today – 781-341-7007

What To Do If You See Mold

4/10/2017 (Permalink)

If you see visible mold, do not disturb it

If you see visible mold, do not disturb it. You can inadvertently spread the mold infestation throughout your home. When mold is disturbed, the mold can release microscopic mold spores which become airborne and can circulate inside your home.

What to Do:

• Stay out of affected areas.
• Turn off the HVAC system and fans.
• Contact SERVPRO of Milton / Braintree for mold remediation services.

What Not to Do:

• Don’t touch or disturb the mold.
• Don’t blow air across any surfaces with visible or suspected mold growth.
• Don’t attempt to dry the area yourself.
• Don’t spray bleach or other disinfectants on the mold.

About Our Mold Remediation Services

SERVPRO of Milton / Braintree specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business.  Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.

If You See Signs of Mold, Call SERVPRO of Milton / Braintree Today – (781) 341-7007

SERVPRO of Milton/Braintree Uses HEPA Filtration

3/25/2017 (Permalink)

Using HEPA filtered air scrubbers will help remove small particles from the air and leave the air we breathe cleaner.

You have probably heard the term HEPA in commercials for vacuums, but what does it mean?  The definition of HEPA stands for high-efficiency particulate air.

What that means is that air that is passed through a HEPA filter will have 99.7% of particles in the air that are .3 microns or larger. To help put that in perspective the diameter of a human hair is between 50 and 75 microns.  So as you can see a HEPA filter is capable of removing very small, invisible to the naked eye, particles from the air. Those particles could include but are not limited to dust, pollen, mold spores, soot or ash.

Using a HEPA filtered air scrubbers or vacuums can help remove these small particles from the air and leave the air we breathe cleaner while removing odors.

For mold removal service, call SERVPRO of Milton / Braintree today – (781) 341-7007

The Importance of Containment

3/13/2017 (Permalink)

Our team creates a site protection plan in accordance to each customer’s unique needs.

Every construction project, no matter how large or small, will create a cleaning project. Fortunately, there are many ways to keep post construction cleaning to a minimum, all of which SERVPRO of Milton/Braintree can provide.

Pre-construction site protection certainly has some financial benefits.  It will reduce required labor, prevent incidental damage to unprotected areas, and shorten project lifetime. Containment also has some safety benefits – it creates a safety barrier to keep non-construction people away from the work area and it will help prevent the spread of airborne particles / construction dust, some of which may be toxic and difficult to clean completely.

Overtime these particles settle over surfaces and belongings, traveling through HVAC systems and permeating throughout the home. It is possible to suffer from post construction dust for months or even years, especially if the HVAC system has not been properly sealed or cleaned. This can negatively affect the occupants, chiefly those with compromised immune systems or those sensitive to allergens.

Our team creates a site protection plan in accordance to each customer’s unique needs. Construction and site protection can at times be obstructive to those who choose to occupy the home throughout the project. However, our team strives to design contaminate shields that won’t compromise the occupants’ use of the home. By utilizing our vast range of materials to protect HVAC systems, carpeting, walls, ceilings, and everything in between, SERVPRO of Milton/Braintree can save you time, money and headaches.

Mold Prevention Tips

2/2/2017 (Permalink)

Follow these tips to help prevent mold growth.

• Keep humidity levels as low as you can—no higher than 50%--all day long. An air conditioner or dehumidifier will help you keep the level low. Bear in mind that humidity levels change over the course of a day with changes in the moisture in the air and the air temperature, so you will need to check the humidity levels more than once a day.
• Be sure your home has enough ventilation. Use exhaust fans which vent outside your home in the kitchen and bathroom. Make sure your clothes dryer vents outside your home.
• Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.
• Clean up and dry out your home thoroughly and quickly (within 24–48 hours) after flooding.
• Add mold inhibitors to paints before painting.
• Clean bathrooms with mold-killing products.
• Remove or replace carpets and upholstery that have been soaked and cannot be dried promptly. Consider not using carpet in rooms or areas like bathrooms or basements that may have a lot of moisture.
• To learn more about preventing mold in your home, see the Environmental Protection Agency's publication A Brief Guide to Mold, Moisture, and Your Homeat http://www.epa.gov/mold/moldguide.html.

For mold removal service, call SERVPRO of Milton / Braintree today – (781) 341-7007

The Facts and Myths About Mold

8/12/2016 (Permalink)

For the average homeowner, mold growth can be one of the top health hazards in their home, as serious a concern as asbestos and lead. Considered a respiratory hazard, any mold growth in your home should properly be remediated by a IICRC mold certified technician. At SERVPRO of Milton/Braintree, we have highly trained mold removal professionals on staff that can help make your home a safer environment, because we understand the difference between the facts and myths about mold and the mold remediation process.

Facts

·         Mold is present in almost all atmospheres

·         Mold spores can contain mycotoxins that can be harmful to the respiratory system.

·         Infants, the elderly, pregnant women, and individuals with immune deficiencies or a history of immune weakness are among those who may be affected more easily and more severely by a mold infestation.

·         Air sampling is the only current accurate method to analyze non-visible spores and should be performed by an Industrial Hygienist (I.H.)

·         During mold remediation there should always be a form of containment.

Myths

·         Bleach has been a proven product for eliminating mold

·         Mold only grows in wet or moist environments

·         Any cleaning company is equipped to eliminate mold

·         Mold can be fully eradicated

Call SERVPRO of Milton/Braintree for your free consultation and mold remediation estimate. We’ll make sure your property is cleaned quickly and safely so that it will be like it never even happened.

Call us today at (781) 341-7007.

About SERVPRO of Milton / Braintree

SERVPRO of Milton/Braintree specializes in the cleanup and restoration of residential and commercial property after a fire, smoke, or water damage event. Our staff is highly trained in property damage restoration. From initial and ongoing training at SERVPRO’s corporate training facility, to regular IICRC-industry certification, you can rest assured our staff is equipped with the knowledge to restore your property.

Milton, Braintree, Randolph, Avon & Holbrook Residents: Follow These Mold Safety Tips If You Suspect Mold

4/20/2016 (Permalink)

If you see visible mold, do not disturb it. You can inadvertently spread the mold infestation throughout your home. When mold is disturbed, the mold can release microscopic mold spores which become airborne and can circulate inside your home.

What to Do:

• Stay out of affected areas.
• Turn off the HVAC system and fans.
• Contact SERVPRO of Milton / Braintree for mold remediation services.

What Not to Do:

• Don’t touch or disturb the mold.
• Don’t blow air across any surfaces with visible or suspected mold growth.
• Don’t attempt to dry the area yourself.
• Don’t spray bleach or other disinfectants on the mold.

About Our Mold Remediation Services

SERVPRO of Milton / Braintree specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business.  Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.

If You See Signs of Mold, Call Us Today – (781) 341-7007

Does Your Home Have A Mold Problem?

4/20/2016 (Permalink)

Mold can spread through a home in as little as 48 hours.

Microscopic mold spores naturally occur almost everywhere, both outdoors and indoors. This makes it impossible to remove all mold from a home or business. Therefore, mold remediation reduces the mold spore count back to its natural or baseline level. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

• Mold is present almost everywhere, indoors and outdoors.
• Mold spores are microscopic and float along in the air and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
• Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens and irritants.
• Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
• Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
• Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.

If You See Signs of Mold, Call SERVPRO of Milton / Braintree Today – 781-341-7007

What is HEPA and why is it important?

3/9/2016 (Permalink)

You have probably heard the term HEPA in commercials for vacuums, but what does it mean?  The definition of HEPA stands for high-efficiency particulate air.

What that means is that air that is passed through a HEPA filter will have 99.7% of particles in the air that are .3 microns or larger. To help put that in perspective the diameter of a human hair is between 50 and 75 microns.  So as you can see a HEPA filter is capable of removing very small, invisible to the naked eye, particles from the air. Those particles could include but are not limited to dust, pollen, mold spores, soot or ash.

Using a HEPA filtered air scrubber or vacuum can help remove these small particles from the air leaving the air we breathe cleaner and remove odors.

Mold Prevention Tips from the CDC

2/15/2016 (Permalink)

·         Keep humidity levels as low as you can—no higher than 50%--all day long. An air conditioner or dehumidifier will help you keep the level low. Bear in mind that humidity levels change over the course of a day with changes in the moisture in the air and the air temperature, so you will need to check the humidity levels more than once a day.

·         Be sure your home has enough ventilation. Use exhaust fans which vent outside your home in the kitchen and bathroom. Make sure your clothes dryer vents outside your home.

·         Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.

·         Clean up and dry out your home thoroughly and quickly (within 24–48 hours) after flooding.

·         Add mold inhibitors to paints before painting.

·         Clean bathrooms with mold-killing products.

·         Remove or replace carpets and upholstery that have been soaked and cannot be dried promptly. Consider not using carpet in rooms or areas like bathrooms or basements that may have a lot of moisture.

·         To learn more about preventing mold in your home, see the Environmental Protection Agency's publication A Brief Guide to Mold, Moisture, and Your Home at http://www.epa.gov/mold/moldguide.html.